background image

Attendant Features

19

Attendant Directory List Programming

The Attendant can program up to 200 names in the directory 
list. When the directory list is accessed by any display 
telephone user, the system displays the name associated with a 
speed dial number so when the desired name is shown, the 
user may then have the system dial the number.

To access Directory List Programming:

Dial the Directory List program code [693].

The HOLD button will illuminate and the first entry (000) in 
the Directory List will display:

Directory List

The following procedure is used to enter, edit, and erase names 
in the Directory List for stations or speed dial numbers.

To modify the Directory List:

1.

Enter the desired 3-digit Directory List number (000-199), 
or dial [

.

] to scroll up (next entry) or [#] to scroll down 

(previous entry) through the list.

If changing a name already associated with an existing 
station, skip to Step 4.

2.

Press TRANS.

D I R    L S T    A A A       B I N / IC M :    XX X X
n n n n n n n n n n n n n n n n n n n n n n n

AAA

=

Directory List entry number (000-199)

XXXX

=

One of the following:

» 3- or 4-digit station number (100-8999)

» 3-digit local number/name translation table number
   (600-799 minus station numbers that would overlap)

» 4-digit remote device number (1000-8999 minus
   (1000-8999 minus station numbers that would overlap)

» 4-digit system speed bin number (9020-9999)

nnn

=

Programmed Name (blank, if none)

Summary of Contents for Digital telephone



































































































































Reviews: