Conference
49
To exit a Conference (controller only):
For a Single-line conference …
1.
Press the ON/OFF button to ON.
2.
Press the MUTE button, then replace the handset to
monitor the conference.
For a Multi-line conference …
1.
Press the HOLD button to place outside parties on hold.
The Hold Timer starts. If one of the two parties is internal,
that party is dropped.
2.
Either press CONF and hang up or press the ON/OFF button
or use the Soft Key’s EXIT option to leave the other
conference parties still connected in an unsupervised
conference. The CONF button flashes and the timer starts.
There is a warning tone before the other parties are
dropped.
To re-enter a Conference:
When the controller re-enters the conference, the disconnect
timer is reset.
1.
Lift the handset to re-enter a monitored conference.
2.
To re-enter a conference placed on hold, repeat the steps
for establishing a conference.
3.
To re-enter an unsupervised conference, lift the handset
and press the flashing CONF button or use the Soft Key’s
RE-ENTER option. The CONF button will light steady and a
confirmation tone will sound.
To terminate a Conference, the conference initiator who is
actively in the conference must:
Replace the handset or press the ON/OFF button to OFF.
To terminate an Unsupervised Conference:
Press the flashing CONF button or use the Soft Key’s END
option while on-hook, all parties will be dropped.
Summary of Contents for Digital telephone
