G-106
6
3. Integrated with full function front panel keypads and IR remote controller. Manual geometry
alignment up to 9*5 grid pattern. The geometry adjustment range is up to +_600 pixels in horizontal
direction and +_400 pixels in vertical direction at each corner in FHD output.
4. PC software tool is available for warp and geometry alignment up to 17x17 grid pattern. After
finishing geometry alignment, the parameters can be stored in G-106 and no more PC is needed.
The geometry adjustment range will be double if compared with remote controller adjustment, i.e.
H=+_1200 pixels and V=+_800 pixels in full HD output resolution.
5. Execute 4 directions edge blending. No limitation in the number of the projectors.
6. Provide complete functions for edge blending fine-tune and color correction.
7. Precise black level uplift at selectable area to compensate light leakage in the projector.
8. White balance and individual color correction for each projector.
9. Able to perform flat & curved screen seamless edge blending, including irregular curved screen
and 360 degrees curved screen.
C. Edge Mask:
Able to do edge mask with black background in each edge up to 500 pixels.
D. Passive and active 3D
1. Auto decode 3D signals for passive 3D display, including signal source from Blue Ray, STB, game
console, media player and PC.
2. Auto decode Stereoscopic Player/ Nvidia 3D Vision 1080p @120Hz 3D format and Blue Ray 1080p
24Hz 3D signal into 720p/XGA/WXGA 120Hz signal for active 3D display.
3. Support standard HDMI 1.4a 3D format, including 1080p/24Hz full HD, Side by Side, Top-Bottom,
frame sequential & Line interleaved (Line by Line).
4. Support 3840x1080 Full HD Side by side 3D format and SONY 1080i/60Hz frame packed 3D..
5. 3D display can be on flat and curved screen. It can be expanded by more projector image stacking
or edge blending.
E. High end 10-bit video processor
1. Designed with 10-bit high end processor with 3D motion adaptive de-interlace, low angle smooth
algorithm and 3:2/2:2 film mode detect and recovery function.
2. Complete color adjustment function, including brightness, contrast, hue, saturation, preset colour
mode and independent RGB color adjustment.
F. Video wall function
1. Image split and assign location for each projector.
2. Overlap pixel adjustments up to 900 pixels for image position shift, bezel compensation and creating
overlap region for edge blending.
3. Connect with 4k/2k input signal and split the image for display devices without additional PC, image
splitter or other devices.
4. Serve as video wall controller for irregular video wall display up to 15x15 matrix display from single
signal input source.
