G-106
17
sub-image (PIP) is 1024x768 pixels.
b
、
The input source for PIP is selectable and can be from any input port from the processor. The input
for main and PIP image can be the same or swapped.
c
、
The location of the PIP image can be controlled by OSD menu at any location inside main image.
d
、
The size of the PIP image is also flexible and can be controlled by OSD menu.
e
、
Unless the image is rotated at 90/270 degrees, both main and PIP image will go through high end 3D
motion de-interlacing. When the image is 90/270 rotated, please apply progressive signal source to
get the best video quality.
f
、
If PIP/POP image needs to be across entire screen, user needs to use the first processor as PIP/POP
processor and output the image to HDMI port in next processor, then daisy chain connection to all
other processors. After edge blending, user can see PIP/POP across entire screen.
Display
:
Under Display menu, there are three items:
Disable: to Disable PIP or POP function
PIP: to select PIP display function
POP: to select POP (side by side) display mode. User can select maintain original image aspect ratio
or full screen mode through [Scaling] OSD menu under [Image properties].
Five sub-menus under [PIP setting] menu,
--Display: enable PIP or POP
--Size: set PIP size
--Position: set PIP position
--Ratio: set PIP display aspect ratio
--Source: select input source for PIP/POP
