G-106
37
14.6.3.6
[Save File] & [Save to Box]
After finish Gwarp operation, user can save the result in two locations--PC and GeoBox.
Click [Save file] will save the file into PC and need to use press [Load file] to load back settings.
Click the # under [Save to Gwarp Pro] will save Gwarp result into G-106. User can create up to 10
different Gwarp results into GeoBox. User needs to save the final result in each channel separately.
After save the file, please turn off [Pattern] in Gwarp2 (Hotkey on keyboard: [CTRL + P]) so that user
can see the system OSD through keypad or remote controller.
Next step is to activate GeoBox OSD to load Gwarp result under [Anyplace]
[Gwarp] menu. Select
the same UserMap # as saved in Gwarp2 to load the result into GeoBox.
Please combine with [Video Wall] and [Edge Blend] functions through OSD to complete edge
blending processes. User can save the final result into [Profile] menu and recall it at any time.
Maximum 5 profiles can be saved.
Once select [Gwarp2] geometry alignment result, all the geometry alignment result will be replaced.
