G-106
34
color difference, lamp brightness decay and lamp replacement issue. Through [Color] adjustment, it will
improve the video quality in edge blending.
In edge blending procedures, user needs to adjust the color from projector. If it is still not enough, user
can use [Color] function to do further adjustment. Please note that, any color adjustment will reduce the
color dynamic range. User needs to check the result with full range color image.
14.6 [Gwarp] PC tool
[Gwarp] PC tool is for more detailed geometry alignment, color uniformity adjustment and advanced
edge color fine-tune. User can combine [Gwarp] tool result with GeoBox hardware function to achieve
edge blending. At this stage, only geometry alignment result can be combined into G-106. Other
functions will be added in the future.
14.6.1 When [Gwarp] PC tool is necessary
G-106 hardware system can execute complete edge blending function without [Gwarp] PC tool. In below
conditions, Gwarp PC tool may be still necessary in edge blending operation.
a.
The grid pattern for manual geometry alignment is up to 9*5 only. It can meet most of the application
requirements. However, if the screen is irregular curve or more precise alignment is required, Gwarp
PC tool is needed for further geometry alignment.
b.
If more geometry adjustment range is required. Gwarp has double geometry alignment range.
c.
In the long term, Gwarp will provide more function for the applications, such as auto geometry
alignment, auto edge blending and more intensive color correction.
Under [Color] menu, user can adjust
separate RGB [Gain] and [Offset] value to
change the color and white balance.
[Gain] is to change the color slope and
[Offset] is to add value in all level of
brightness (0-225).
When apply [Color] adjustment, it will
affect entire color performance in the
projector. Please check with different
video contents and make user no side
effect can be found.
