G-106
40
When [Off] is selected, the OSD menu will remain in the screen until user activates other OSD
function.
Internal Grid Pattern will be also controlled by the time setting in [Menu Time Out] menu. For
[Anyplace] geometry adjustment, we recommend user to set OSD [Menu Time Out] to [Off] to
maintain continuously display of the pattern and OSD on the screen.
15.4.3 [Logo Time Out]
15.4.4 [Standby Time Out]—system power ON/OFF control by input signal
This function is to Power ON/OFF complete system through signal source.
15.5 [Setting]
15.5.1 Audio [Mute]
There are 4 items under [Settings] menu:
[Mute] Audi mute or enable
[Box ID]: Set control ID
[Profile]: Save profile settings
[Network]: set RS232 and network control
To set the time to show Splash screen.
If zero is selected, then the splash screen
will not be showed during system booting
up period.
If it is set to “60”, G-106 will automatically
Power off when no input signal is
detected for 60 seconds. In this case, the
output signal to projector will be shut
down as well.
If the projector can also automatically
shut down when no input signal is
detected. User only needs to control
signal source to turn ON/OFF the system.
