G-106
15
a.
[Automatic]: It will do automatic image position alignment.
b.
[Manual]: manual setting for signal Phase and Clock to eliminate image noise in analog input
c.
[Horizontal Position]: to adjust the image horizontal position.
d.
[Vertical Position]: to adjust the image vertical position.
e.
When the input is VGA signal, GeoBox will execute image position auto alignment. After this process,
GeoBox will not do auto alignment again to avoid image shift unless VGA input is from another PC.
9.3 [Image Properties]
[Image properties] is designed to select image color temperature, adjust independent RGB color, select
input port & output resolution, set display aspect ratio, set PIP/POP function and image flip/rotation. There
are six sub-menus.
9.3.1
Color
9.3.2
Input Signal
[Image Setup] menu can only be activated
when video signal input is from VGA analog
input port.
Under [Color] menu:
4 Preset modes for color temperature selection
[Custom]: Independent RGB color adjustment.
Under this menu, if user select [Save], then
[Picture] menu will be activated for access
Six sub-menus:
[Color]: Color temperature selection and RGB
independent adjustment
[Input Signal]: to select input port
[Scaling]: to set display aspect ratio
[Output Mode]: to select output resolution
[PIP setting]: to do PIP/POP settings
[Orientation]: image flip and rotation setting
