G904 User Guide Document: G904-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
8
3. Front panel
➢
Input LED will turn to Green when G904 has detected input signal.
➢
Output LED will turn to Orange when G904 has detected the device in the output.
➢
Power LED:
-
Red: Power connected and has been turned off by remote controller. Need to turn on by remote
controller again.
-
Red: Power on
-
Power LED flashing at 0.5 second interval: OSD locked through Menu. Hold Menu key for 5
seconds to unlock.
-
Power LED flashing at 1 second interval: OSD locked through 85x command. Press 850 on
remote controller number keys to unlock OSD.
4. Back panel
Output LED
Power LED indicator
Input LED
Power Switch
IR reiver
Model No
Input Ports for
specific CH
Output port
CH2/CH4
Output port
CH1/CH3
Common
input port
Loop out
port
DC Power
IN 12V/3A
IR Extender
connector
Reset Hole
Control port
RS232, USB, Ethernet
AC power
socket
