G904 User Guide Document: G904-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
24
13.2.
PIP (Picture in Picture)
- Main & PIP input source is swappable.
- PIP image in each channel is independent. It is only inside one display.
- PIP and main images can be rotated at 90/180/270 degrees independently.
- If one PIP image across multiple monitors (video wall) is required, user can feed PIP image to all
channels and use [Size], [Position] & [Overlap] functions to get one PIP image across entire video
wall. User can also add one G900 as front end to have more flexible PIP/POP.
13.2.1.
PIP [Size] and [Position]
- PIP image size is from 320*180 to 1920*1200.
- It can be further adjusted through Overlap function to get about 160*130 image size.
- User can replace main image with sub-image on entire display under FHD output resolution.
- The PIP image position can be at any location with 100 adjustment steps in H&V direction.
- PIP image in each channel is independent.
13.3.
POP (or PBP): Picture outside Picture (or Picture by Picture)
-
[SBS]: Side by Side 2 split display.
-
[Top/Bottom]: Top/Bottom 2 split display.
-
[SBS 2/1]: 2/3:1/3 side by side display.
-
[POP3]: One image at LH side and top/bottom two images at RH side.
-
[POP4]: One image at Top and two images at bottom.
-
[3X SBS]: Three split views at landscape. The center image size is adjustable.
-
[3X T/B]: Three split views at portrait direction.
-
[4x Split]: Four split view multi-viewer. (Monitor at landscape only)
-
[4x T/B]: Display 4 split views with one image at the top and 3 images at the bottom. Below 3
windows keep 16:9 aspect ratio. Main image can keep full screen or original aspect ratio.
-
POP function is independent in each channel. One G904 can display 7 contents in one 4k
monitor.
13.3.1.
Aspect ratio adjustment
-
POP image
aspect ratio selection:
✓
Main Image: can be selected through [Scaling] under [Image Properties].
✓
Sub-Image: can be selected through [Ratio] OSD menu under [PIP Settings].
-
Further aspect ratio adjustment can be executed through Overlap function. Please see more
details in [Overlap] section.
