G904 User Guide Document: G904-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
15
10.4. Enable 10-bit deep color output
➢
User can select 10-bit deep color through OSD [Image Properties]
→
[ Output Mode]
→
[Deep
Color]
→
On
➢
User can check the result through [INFO] hotkey on remote controller to understand input/output
signal status.
➢
Enable 10-bit color may reduce the input and output maximum resolution. HDMI 2.0 maximum is
600 MHz (18Gb/s). 10-bits 4:2:0 HDR 4k/2k 60Hz output signal can be supported by G900.
10.5. HDR (BT.2020) processing
➢
G900 can process HDR input signal and output full color range RGB 4:4:4 progressive SDR signal
up to 4096*2400 @60Hz.
➢
If the system detects HDR input signal, it will automatically process HDR signal. User can check
System Information through INFO key in remote controller to confirm the status.
- The output refresh rate can be
selected from 24/30/50/60/100/120 Hz.
- If the input and output refresh rate is
not the same, it is possible to cause
synchronization issues in different
output channels.
