G904 User Guide Document: G904-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
17
Please see the result in previous section.
11.2. Check by remote controller
12. System control and setup
➢
The setting for Box ID, RS232 and Ethernet can be executed via OSD, WebGui or GCT PC Tool.
User can only change Box ID, RS232 and Ethernet through CH-1 OSD, WebGui or GCT PC tool.
➢
User can control G900 directly from Ethernet. The default static IP address is 192.168.0.100.
➢
User can set different IP address or Box ID for each unit so that user can execute independent
control to each GeoBox without interference.
12.1. Box ID
➢
Box ID is required for the application with multiple units of GeoBox.
➢
Box ID range is from #1 - #99. When user uses remote controller to control the system through
OSD, the maximum ID setting for remote controller is #1 - #9.
➢
Please set Box ID through CH1: OSD [Options]
→
[Setting]
→
Box ID]
→
select number.
System Information
shortcut key
