G904 User Guide Document: G904-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
30
Case Study: Aspect ratio calculation
Below is case study regarding the relation between aspect ratio and overlap value settings in Video Wall.
If LH edge Overlap value increase 300 pixels and RH edge increases 400 pixels on FHD image, it
means the video total horizontal pixels will increase 400+300=700 pixels. As a result, the total horizontal
active pixels will be 1920+700=2620. The original image in horizontal direction will become
1920/2620=73.28%. The final aspect ratio will become (16*73.28):9=11.7:9
15.4. System Standby and automatically turn off output signal
➢
OSD [Options]
→
[Accessibility]
→
[Standby Time]. Each channel is set separately.
➢
If set [Standby Time] at 60, the system will get into Standby Mode after 60 seconds when no input
signal is detected. The output signals from related channel will also be terminated at the same
time. If detects input signal again, it will automatically turn on the system again. During Standby
period, G904 will be still in ON status.
➢
If the monitor can automatically turn off/on function by detecting input signal, user can control
signal source to execute entire system on/off control.
15.5. Change Background Color in Blue or Black
✓
OSD [Options]
→
[Accessibility]
→
[Black Screen]
→
[Off]/[On]
✓
When no signal input, user can select
either blue color background with
[Power Saving Mode] message on
the screen or black background color
without message.
