G904 User Guide Document: G904-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
13
10. Set output resolution and signal type
➢
If G904 output is the same as display device native resolution, it will perform the best video quality.
➢
Please note that if the output is 4k/2k and connect to FHD monitor, it will not show up the image.
Please click 1080p output in remote controller to see the image.
10.1. Select output resolution from remote controller
Four output resolutions are preset in remote controller--1080P, WXGA, XGA and [OTH] (4k/2k)
progressive output with 60Hz refresh rate.
Step 1: Select channel No.
Step 2: Direct click Output selection key
10.2. Select output resolution from OSD
➢
Each channel needs to set output resolution separately. Default output resolution is 1920*1080/60.
➢
Select channel No
→
Open OSD via remote controller
→
[Image Properties]
→
[Output]
→
Select
[Output resolution].
➢
17 preset output modes are embedded in OSD.
➢
All default output resolution is FHD 60Hz, RGB 4:4:4 format and progressive.
➢
If user select a timing that the monitor can’t support, user can’t see any image,
➢
If the input refresh rate is not the same as output, it is possible to see synchronization issue among
multiple displays.
Select Channel #
Select Output resolution
Output selection keys
