VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
17
☐
Apply a generous amount of spline grease (supplied with the PTO) to both
splines. Ensure that the grooves of each are fully filled.
☐
Slide the compressor forward onto the PTO until it is fully mated (Figure 16).
Figure 16 — Install the compressor
☐
Using the (×2) supplied fasteners and flat washers, secure the compressor to
the PTO.
Using a torque wrench, ensure the bolts are torqued to 40 (ft•lb).
☐
Install the supplied clip nuts onto the remote regulator bracket (Figure 17).
Figure 17 — Install the regulator
Ground strap
☐
Locate the (×2) M6 studs on the driver side firewall near the OEM ground strap
Install clip
nuts
