VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
14
☐
Connect the hose to the small spigot on the passenger side of the cooler using
a hose clamp (Figure 12).
Figure 12 — Connect hose to VMAC cooler
Front of
vehicle
☐
Using the supplied P-clips, bolts, and clip nuts, secure the heater hose to the
radiator support.
☐
Adjust all connections as necessary to confirm that all joints are engaged
securely and that there are no twists, kinks or pinches.
☐
Secure all the connections with the supplied hose clamps.
Do not remove the coolant lines from the coolant valve.
☐
Remove the coolant valve (located near the transmission PTO port) from its
mounting bracket (Figure 13).
Figure 13 — Connect hose to VMAC cooler
Remove coolant
valve
