EN
DISPLAY ALARMS
Error code
Machine behaviour
Description of the
problem
Possible solution
PAUSE MOTOR
Drive stops
Drive motor
overtemperature >
95°C.
Alternator
overtemperature >
150°C
If having driven up a
slope this may can be
normal, let the motor
cool down for 20
minutes.
Check that the cooling
fan is working
Check that the brake
is not locked.
Check that the front
wheel turns freely.
PAUSE DRIVE
Drive stops
Electronic
control circuit
overtemperature >
85°C
If the air temperature
is high, stop the
machine for 20
minutes, then start
again. If the problem
remains, contact a
service centre.
BRUSH CURRENT
The working functions
are disabled
Excess current or
centre brush blocked
Check free brush
movement or for
the presence of any
impediments (ropes,
plastic and so on)
CHANGE OIL
This is only shown if
the machine has a
combustion engine
It is activated after 99
operating hours
It warns the operator
to change the engine
oil (to reset it, press
the display button
for 5 seconds while
the hour counter is
displayed)
BATTERY RESERVE
This is simply a
warning that the
battery charge is
getting low
It is shown when the
battery voltage falls
below 21.3V
No action needed,
except to charge the
battery
BATTERY
DISCHARGED
The machine’s
functions are stopped,
excluding drive
If the voltage read
falls below 20.3V
for 3 seconds
consecutively
Charge the battery
23
