EN
,03257$17WKH³2,/$/$50´LQGLFDWRU
OLJKW¿JFRPHVRQZKHQLJQLWLRQLV
VWDUWHGRQLJQLWLRQWKHHQJLQHVWDUWVDQG
WKHLQGLFDWRUOLJKWJRHVRႇ,IWKHOLJKW
FRPHVRQZKHQGULYLQJVWRSWKHPDFKLQH
DQGFKHFNWKHHQJLQHRLOOHYHO
To start the combustion engine, push the
VHOHFWRUWRWKH67$57SRVLWLRQ¿JWKH
lever returns automatically.
127(LIQHHGLQJWRSXVKWKHPDFKLQH
ZKHQRႇRUZLWKRXWWKHEDWWHULHVWXUQWKH
DSSURSULDWHNH\WRGLVHQJDJHWKHHOHFWULF
GULYHPRWRUWKLVZLOOGLVDEOHWKHPDFKLQH¶V
DXWRPDWLFEUDNLQJIXQFWLRQ¿J
If the combustion engine does not start
immediately, the starter motor must not be
engaged for more than 5 seconds. This interval
can be repeated after a short rest period (about
8 - 10 seconds).
To stop the engine, turn the selector back
to the OFF position. In the event where
the alternator overheats, there is an
overtemperature protection device that stops
the machine; the “PAUSE MOTOR” error code
will be shown on the display
To start the machine, select forward or reverse
JHDUXVLQJWKHVHOHFWRU¿J
AUTO-POWER ON/OFF
The machine is equipped with an automatic
V\VWHPIRUVZLWFKLQJWKHIXQFWLRQVRQRURႇ
Selecting one of the three work programs, P1,
P2 or P3 temporarily activates the following
functions: centre brush, suction, side brushes;
the LED for the selected program lights up
together with the centre brush LED.
If the accelerator pedal is not pressed, after
a few seconds the functions will stop and the
/('VZLOOVWDUWÀDVKLQJWKHPDFKLQHLVQRZLQ
AUTO-POWER-OFF mode.
All of the functions are automatically
reactivated whenever the operator presses the
accelerator pedal.
By releasing the accelerator, all the functions,
except for the combustion engine, are
automatically deactivated.
127(WKH³$87232:(5212))´V\VWHP
FDQEHGLVDEOHGLQWKHPDFKLQH¶VVRIWZDUH
PHQXVHHWKHFKDSWHU³86(50(18´
¿J
¿J
START
OFF
OFF
ON
¿J
¿J
12
