VKI Technologies Eccellenza Express Operating Manual Download Page 59

Page: 59 / 84

Eccellenza Express – Operating Manual

August 8, 2013

Secondary Settings

Throughout the programming section of this manual, you may notice certain

secondary functions or settings in the equipment Set-Up that are not described

in detail in this manual. A table with a quick description of these functions and

settings is included to provide you with an idea as to what they control.

Description of Certain Functions or Settings

Force Vending

When enabled, this feature prevents people from

using the Eccellenza Express as a ‘change maker’.

This is usually done by inserting a $1 or $2 coin or

paper bills, and then pressing the coin return button

to have the machine dispense change in quarters.

There are three different settings:

•

OFF - the force vend feature is disabled and

the unit will function normally.

•

SMART - the coin return feature of the changer

is disabled only when a $1 or $2 coin is

inserted.

•

ON - the coin return feature of the changer is

completely disabled, regardless of what coins

are inserted.

Vending Device

This setting allows you to activate or deactivate the

specific type of money system to be used. There are

two different settings, both of which can be activated

at the same time, if required.

•

Coin Changer

•

Bill Acceptor

•

Printer

Bill Type

Should a bill acceptor be used on the Eccellenza

Express, this setting allows you to program the

denomination of the bills that are accepted or

rejected by the equipment.

NOTE:

In Vending Mode, any change that is owed to the customer will be

dispensed after the beverage has been prepared.

Summary of Contents for Eccellenza Express





















































































Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands

VKI Technologies Eccellenza Express, Operating Manual

Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands