VKI Technologies Eccellenza Express Operating Manual Download Page 66

Page: 66 / 84

Eccellenza Express – Operating Manual

August 8, 2013

Empty Water Tank (to Valve Level)

This feature allows you to drain the water tank to the valve level using the hot water outlet

valve. This is a particularly useful feature should you need to replace an outlet valve as it is

not necessary to completely drain the water tank, leaving most of the hot water in the

tank. This greatly reduces the time required to reheat the water once the tank is refilled.

Turn off the water supply to the machine.

While in the Set-Up mode, select the S

ATER

ANK

option on the

screen to access this menu.

Select the “Empty Water Tank” option.

The display will now prompt you to press “Start” to empty.

Summary of Contents for Eccellenza Express





















































































Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands

VKI Technologies Eccellenza Express, Operating Manual

Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands