VKI Technologies Eccellenza Express Operating Manual Download Page 82

Page: 82 / 84

Eccellenza Express – Operating Manual

August 8, 2013

MESSAGE DISPLAYED

CAUSE

POSSIBLE REMEDIES

Water Source Error

Indicates a problem with
the main water supply not
getting to the water tank.

•

At this point, the water tank is not full

and this message has to be reset. To
reset it, switch the power off and on.

•

If the problem persists, check all

components on the water line (water
filter, tubing, fittings, etc.).

•

Check inlet valve to make certain it

is functioning properly.

•

In the case of a temporary disruption

with the water supply, the coffee maker
will reset itself after every hour.

Whipper Error

An error has been
detected with the
whipper.

•

The whipper motor may be jammed.

Clean the whipper assembly.

•

Verify wiring to the whipper assembly.

•

The whipper motor assembly may

need to be replaced.

Summary of Contents for Eccellenza Express





















































































Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands

VKI Technologies Eccellenza Express, Operating Manual

Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands