VKI Technologies Eccellenza Express Operating Manual Download Page 19

Page: 19 / 84

Eccellenza Express – Operating Manual

August 8, 2013

Checking the Water Temperature

The temperature of the water in the water tank can be checked at any time while the

machine is in standby mode. To check the water temperature, press the “Language”

button and keep it pressed for five seconds.

The temperature is then displayed in the lower center of the screen.

The remove the temperature reading from the screen, press the “Language” button and

keep it pressed for five seconds.

NOTE:

When pressing the Language button to view the temperature, the

language setting will change. Use the Language button to re-set the language
back to its original setting.

Summary of Contents for Eccellenza Express





















































































Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands

VKI Technologies Eccellenza Express, Operating Manual

Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands