VKI Technologies Eccellenza Express Operating Manual Download Page 71

Page: 71 / 84

Eccellenza Express – Operating Manual

August 8, 2013

Maintenance

To keep the Eccellenza Express running efficiently and at peak performance, the

following maintenance procedures must be performed at their specified intervals. It

is recommended that equipment maintenance be scheduled at a time that would be

the least disruptive to your customers. Whenever possible, replace the components

requiring maintenance with new or refurbished ones, and then refurbish the older

components at your shop.

Daily

►

Empty the Drip Tray – empty the contents of the drip tray and rinse the

tray and grill under clean running water.

►

Empty the Waste Bin – empty the contents of the waste bin.

►

Refill the Coffee Hoppers, Powder Hoppers – top off the coffee and

powder hoppers, and reset the product counters.

►

Perform a Whipper Rinse Cycle – this should be done immediately after

refilling the powder hoppers to flush any product that may have fallen into

the whipper.

►

Wipe Exterior and Countertop – using the clean towel, wipe any coffee

grounds and spills from the exterior of the machine and the countertop.

Weekly

►

Clean the Grounds Tray and Floor Liner – empty the and clean the

grounds tray located below the brewer. Remove and clean the floor liner

over the base of the machine.

►

Wipe Interior Walls and Door - using the clean towel, wipe any coffee

grounds and spills from the interior of the machine and the front door.

►

Perform a Brewer Quick Rinse Cycle – for the weekly Brewer Quick

Rinse cycle, it is not necessary to use any brewer cleaner. Simply flushing

the system with the hot water will help to keep it clean.

►

Clean the Brew Chamber – the brew chamber should be removed and

thoroughly rinsed under warm running water.

►

Clean the Grinder Spout – coffee grounds will accumulate in the grinder

spout opening due to static electricity and moisture from the brewer. The

grounds need to be removed or the grinder may jam. With the brew

chamber removed, use a plastic stir stick to delicately remove any coffee

accumulation from around the inner edge of the grinder spout.

WARNING:

Never use ammonia based cleaners on any machine

surface as the surface will become discolored and/or damaged

permanently. Use only mild cleaning products, such as dish soap.

Summary of Contents for Eccellenza Express





















































































Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands

VKI Technologies Eccellenza Express, Operating Manual

Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands