VKI Technologies Eccellenza Express Operating Manual Download Page 58

Page: 58 / 84

Eccellenza Express – Operating Manual

August 8, 2013

Set Vending Menu

Settings Accessed in this Menu

Set Beverage Prices

Force Vending

Money System Type

Bill Denomination Setting

While in Set-Up, use the “Up” or “Down” arrows to scroll through the available options,

press the required option or press “Enter” to select and advance one level, or press

“Previous” to go back one level.

NOTE:

This menu is

only visible

when the Eccellenza Café is

set to

“Coin”

mode. It does not appear in “Free” mode.

NOTE:

To reserve a menu location for possible future products that the equipment

may offer, the label

“Not Used”

may appear in certain menus. For clarity, these

menus are not listed in the flowchart and can be ignored when in the set-up mode.

Summary of Contents for Eccellenza Express





















































































Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands

VKI Technologies Eccellenza Express, Operating Manual

Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands