VKI Technologies Eccellenza Express Operating Manual Download Page 14

Page: 14 / 84

Eccellenza Express – Operating Manual

August 8, 2013

Initial Coffee Water Level Adjustment

When the Eccellenza Express is initially installed, you may be required to adjust the coffee

water level in the cup. Instead of going into the set-up and changing multiple water

settings, you can simply adjust the restrictor on the coffee valve to compensate.

Remove the right side panel.

Remove the two screws securing the panel to the machine.

Adjust the restrictor on the coffee valve using an Allen key.

Turn the restrictor clockwise to decrease the water flow.

Turn the restrictor counter-clockwise to increase the water flow.

Re-install the water tank valve cover.

Restrictor

Summary of Contents for Eccellenza Express





















































































Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands

VKI Technologies Eccellenza Express, Operating Manual

Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands