VKI Technologies Eccellenza Express Operating Manual Download Page 27

Page: 27 / 84

Eccellenza Express – Operating Manual

August 8, 2013

Clearing Message Counters

Open the front door and press the “C

YCLE

REWER

” button. The brewer

will cycle and stop, and the screen now displays the following:

Press the “Clr Hopper 1” button to reset the “Refill” reminder

message for Colombian.

Press the “Clr Hopper 2” button to reset the “Refill” reminder

message for French Roast.

Press the “Clr Powder 1” to reset the “Refill” reminder

message for Milk.

Press the “Clr Powder 2” to reset the “Refill” reminder

message for Chocolate.

Press the “Clr Waste Bin Count” to reset the “Empty” reminder

message for the Waste Bin.

To clear all of the counters at the same time, press the “Clear All

Counters” button.

Summary of Contents for Eccellenza Express





















































































Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands

VKI Technologies Eccellenza Express, Operating Manual

Search results

Summary of Contents for Eccellenza Express

Reviews:

Related manuals for Eccellenza Express

Brands by name

Popular brands