Vivax Metrotech 4.04.000170, User Handbook Manual

Page: 64 / 76

™
Page 56 of 66
5 The Loc3 Series Transmitters
5.6 Removing and Installing the Battery Tray
These procedures apply to both the Alkaline or Rechargeable battery tray.
Removing the battery tray
1. Reach under the catch and pull to
unlock.
2. Lift the catch and repeat for all
four catches.
3. Lift the transmitter base from the
battery tray.
Installing the battery tray
The battery tray and transmitter base
have a matching aligning post, contact
pins and socket.
Aligning the post in their receptacles
will assure that the contact pin will mate
and not be damaged.
1. Align the aligning post and lower
the transmitter base into the
battery tray.
2. Press down on the locking catch
until it locks in place. Repeat and
lock all four latches.
5.7 Transmitter Modes
WARNING
Always connect the transmitter to the target line following your company's procedures. These
operations should only be performed by authorized personnel. Always make connections before
switching on the unit. Turn the transmitter off before disconnecting.
NOTE
When the 25-watt transmitter is powered on without connection leads a “NO CONNECTION” message
will appear on the LCD. Power off the transmitter and insert the connection leads, and procced with
power up.
NO CONNECTION
25-Watt Transmitter (Only)