Vivax Metrotech 4.04.000170, User Handbook Manual

Page: 72 / 76

™
Page 64 of 66
6 Accessories & Options
6. Accessories & Options
6.1 Transmitter Signal Clamps
Clamps are accessories used to apply the transmitter signal to an insulated line, removing the need to connect the transmitter
signal directly to a conductor or cable sheath.
Sizes
5-Watt and 10-Watt Transmitters : 2-inch
(50mm)
, 4-inch
(100mm)
, 5-inch
(125mm)
and 18-inch
(45cm)
flexible version.
25-Watt Transmitter : 4-inch (100mm) and 5-inch (125mm) .
6.2 A-Frame Fault Locator
The A-frame accessory is used to detect ground faults on pipes and cables. In the case of
pipes, the faults consist of coating defects. In cables, faults are usually caused by insulation
damage allowing the metallic sheath (or internal conductor) to contact the earth.
6.3 vLoc3-MLA (Marker Locator Adapter)
The vLoc3-MLA (Marker Locator Adapter) is designed for easy, fast, and accurate location
of buried EMS markers. Once located, the MLA will give the depth of cover to the buried
marker with the touch of a button.
The MLA attaches to the bottom of vLoc3-Pro, RTK-Pro, vLoc3-9800, and vLoc3-5000
receivers. When attached and plugged into the receivers, two marker related operating
modes are enabled.
Visit us at www.vxmt.com to see the full range of receiver and transmitter accessories and available options.