Vivax Metrotech 4.04.000170, User Handbook Manual

Page: 19 / 76

™
Page 11 of 66
2 vLoc3 RTK-Pro Receiver
Internet
(Cloud)
Satellite
Base 1 Base 2
Trip caster
Base 3
vLoc3 RTK-Pro
Satellite
Satellite
Satellite
Cellular
Tower
This set-up procedure assumes the operator has a suitable data-enabled SIM card registered with a cellular network provider and
that the operator has registered with an RTK provider. It is also assumed that the operator has the latest version of MyLocator3
installed on a computer. (see the section on MyLocator3).
Three areas of set up are required before the cm accuracy GNSS can be used:
1. SIM set-up
2. RTK connections with MyLocator3
3. Cloud (VMMAP based data logging)
2.7.1 SIM Set-up
Data is received and transmitted from the vLoc3 via a cellular network of your choice.
Needed : nano-size data-enabled SIM card
Tools needed
: Small cross blade screwdriver
1. Remove the expansion slot cover by unscrewing the two retaining screws.
The SIM card slot is positioned between two micro USB sockets. The USB sockets are used in manufacturing only so they should
be ignored.
2. Insert the nano-sized SIM card connection pads facing upwards towards the display.
Make sure the SIM card is pushed fully into place.
To remove the nano-SIM card, push the SIM in to unlatch it before it is released.