Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49 (0)4102 231235,
Fax: +49(0)4102 231444, e-Mail: [email protected]
1
Vivanco VivControl 6, 8 & 8 Eco Set
Universal Controller
1.
2.
3.
= SETUP (3 s) = Set
4.
= TV
5.
= 1
Set: X
XX, e.g.
1
=
1
XX
6.
=
5
;
Set:
X
X
X, e.g.
5
= 1
5
X
7.
= 2
Set:
XX
X
, e.g.
2
= 15
2
(GB) Instructions
VivControl 6 + 8 remote control and VivControl 8 EcoSet for
almost all TV, audio, video and other infrared-controllable
equipment
1 Inserting the batteries
Open the battery flap on the back of the remote control, s. Fig.1.
– press the tongue lightly upwards, then insert 2 (VivControl 6)
or 4 alkaline AAA batteries. Check that the polarity markings on
the batteries and in the battery compartment are correctly lined
up (+=+), then close the flap carefully. – Always use undamaged
batteries.
2 Setting
label
Attach the enclosed label in your language to the back of the
VivControl so that you can still set the remote control should
these instructions not be available.
3 Adapting to appliances
In order to control your appliances you must adapt or set the
remote control to them. There are three ways of doing so: direct
control code entry, code search or learning the button functions
of original remote controls.
If your VivControl does not understand you it blinks rapidly
several times. Each understood entry is confirmed by an
appliance button blinking once briefly.
