Vitl Lu-Mini, Instructions For Use Manual

Page: 27 / 85

Instructions for Use
27
6.4.3 Sample Vessel Insertion and Removal
Once the Sample ID has been set (see Section 6.4.2), insert the test sample
vessel into the reader sample chamber using the following procedure.
→
Open Lid Insert Sample Vessel
Ensure that the sample vessel is fully pushed down into sample chamber
until the bottom of the vessel is touching the bottom of the chamber.
→
Ensure Vessel Fully Inserted Close Lid
Once inserted, vessels that are less than 50mm tall are almost completely
enveloped by the sample chamber and cannot be easily retrieved by hand.
→ →
75mm Tube Fully Inserted 48mm Vial Fully Inserted