ENVI Series: VTC-IR302FN
43
13.5.
Bandwidth Control Configuration
Bandwidth control is for limiting maximum network traffic. If it is enabled with Bandwidth limits,
maximum data size transferred from VITEK cameras won’t exceed bandwidth limits set by users. If
transferred data is exceeded, part of the data will be randomly lost.
If multiple users try to access a VITEK camera when bandwidth control is enabled, users
connected to the VITEK camera will share network bandwidth limit.
13.6.
View Network Status
This menu shows network status of VITEK cameras.
Note: This bandwidth control feature works well in M-JPEG video transmission. But, for
H.264, dropping data packets may cause low quality of video, so it is
recommended to utilize CBR and frame rate control instead of bandwidth control
for H.264 video. Refer to
Section 14.2
Camera & Motion
on page 51
for more
info on CBR and Frame rate.
Note: Network Bandwidth control is managed by the VITEK camera and it drops any data
packets if required, thus you may experience slow connection when this feature
is enabled.