manualshive.com logo in svg

Vitek VTC-402NZ, User Manual, Page: 48 / 193

Share
Download
Vitek VTC-402NZ User Manual Download Page 48

ENVI Series: VTC-IR302FN

 

 

 

47 

 

 

 

13.10.

 

RTP/RTSP Setup 

Factory default is Enable to be used with other manufactures VMS software’s 

RTSP (Real-Time Streaming Protocol) is a protocol to transfer video and audio streams over the 
network. Any application supporting Standard RTSP can be used for VITEK cameras. Quick Time 
Player or VLC program can be used with this; it may not be supported in the environment within a 
firewall. There are two types of usage; one for Unicast address condition and the other for 
Multicast address condition. 

For Unicast Address:  

Use “

rtsp://network video server ip address/cam0_0

”. If there are multiple channels, use 

cam0_x, x (0~3) with each number applied. If there are multiple modules, use camx_0 x (0 ~ 3) 
with each module number applied. 

For Multicast Address: 

Use “

rtsp://network video server ip address/mcam0_0

”. If there are multiple channels, use 

mcam0_x, x (0~3) with each channel number applied. If there are multiple modules, use mcamx_0 
x (0 ~ 3) with each module number applied. 
 

Summary of Contents for VTC-402NZ


































































































































































































Reviews:

No comments