ENVI Series: VTC-IR302FN
177
The below image is where you adjust the recording parameters.
Item
Description
A,B,C,D
Camera Selection
Select one or more cameras by clicking buttons.
E
Unselect All
Clear the device list which shows the selected cameras.
F
Condition List
Define the condition for recording to be started.
G
Condition to use
Decide whether to use the defined condition or not.
H
Condition Mode
Select the condition mode for recording.
I
Scheduling
Set up the schedule for recording.
J
Event setup
Set up the event to initiate recording.
K
Apply to Condition
Apply the configured schedule and event data to condition list.
L
Apply to Camera
Apply the condition to camera.
M
Enable Recording
Service
Enable this to activate the recording. When this is not enabled, it
won’t be saved if a recording condition is set.
