ENVI Series: VTC-IR302FN
178
N
Pre Alarm Images
Select pre-alarm images.
O
Pre Alarm Speed
Select pre-alarm speed.
P
Post Alarm Images
Select post-alarm images.
Q
Post Alarm Speed
Select post-alarm speed
R
OK
Click this button to confirm the change and exit the window.
S
Cancel
Click this button to cancel the all the changed made in this session.
To setup recording, first click camera under
Condition list (
F
).This enables the Configure Recording
Condition (
G, H, I and J
)
Now you can select your
condition mode (
H
). Under condition mode you have four choices always,
schedule, event and schedule and event. (In this example we will record by event only)
Schedule: To schedule time and date of recording (
I
). (When schedule is activated in condition mode)
Event: Here you can select Alarm or Motion (
J
)
After completing your conditions selection click
Apply to condition
(
K
)
After apply to condition click
Apply to camera
(
L
), and then click
OK
(
R
)
When that screen closes click
Apply
