ENVI Series: VTC-IR302FN
98
In the above picture, the firmware version of this product is 4.14-01-ds while the latest
firmware version available is 4.16-B0-ds-VI as you can see at Vitek’s homepage
(
http://www.vitekcctv.com/Downloads.asp
). If you decide to update the firmware, first
create a folder on your computer for the update firmware, than download the latest firmware to
that folder.
Then select the IP device to be updated on IP Installer window, then click
Update Firmware
button from the toolbar. The following window will be displayed.
You may find the
Password
field is empty on the window shown above. If so, click the Password
field of the IP device and enter the proper password for the device. You are not allowed to update
the firmware if the correct password is not provided.
After the password is entered, the
Start Update
button will be enabled now. Click the button to
see the following window for selecting the folder where the file has been saved.
Highlight the
folder than click
OK
.
After clicking OK the following window will be displayed.