Getting Documents
4. Click Auto OCR.
5. Find and select the file(s) that you want to process.
6. Click Add and then click Get.
Pro OCR automatically processes the image file(s) according to the controls
in the Locate and Recognize rows of the Gallery.
OR
1. Click Get Page.
2. Find and select the file that you want to process.
3. Click Add then click Get.
Pro OCR reads in the specified file. You can continue with any combination
of the single-step Locate and Recognize operations, followed by Finish
Processing, or save it in the Pro OCR Deferred format and finish processing it
later on using Process Deferred Jobs.
After the page is read in, Pro OCR treats the page as if it had scanned it.
Getting Fax-modem Files
Pro OCR can also open fax-modem files, if they have been saved in one of the
supported input file formats.
Many fax-modems have both a Standard and a High-Resolution (or Fine) setting.
The Standard setting typically transmits characters at 204 x 98 dpi. The High-
Resolution setting typically transmits at 204 x 196 dpi. Fax-modem files transmitted
at Standard setting may not be recognized by Pro OCR as accurately as those
transmitted at High-Resolution.
To get a fax-modem file, use the same procedure as described in the previous section.
NOTE: It is recommended that you use the highest resolution a fax-modem can
produce for the best possible recognition.
Using Auto OCR With a File
file:///C|/VisioneerDoc/html/03get.htm (12 of 16) [1/20/2003 4:21:17 PM]
