Visionary D4200 User Manual Download Page 51

Page: 51 / 60

Troubleshooting

HIRD

PARTY

ONRTOL

RIVERS AND

LUGINS

Various third-party control drivers and plugins, such as QSC, Symetrix, Crestron, Extron, etc., are available. Please contact

[email protected]

for details.

API

An API providing access to the full range of features on the encoders and decoders is offered to qualified System Integrators. Please

contact

[email protected]

for details.

ROUBLESHOOTING

This section provides useful information to help you to resolve any difficulty you might have with your E4200/D4200 endpoints.

LED

NDICATORS

Power LED (Green) – Blinking: Power on and the unit is booting up.

– Solid On: Power on and the unit is active

Link LED (Green) – Blinking: 1) The unit is connecting with encoder or decoder. 2) The HDMI source is removed.

– Solid On: All the connections are working.

HECKING

IRMWARE

It is important to know the version of the E4200/D4200 firmware in order to troubleshoot the unit. To find the firmware version of your

E4200/D4200 from the embedded device web Interface, navigate to the

Device

tab and the firmware version is shown.

UPPORT

Should you require any technical assistance, please contact your Visionary Solutions reseller. If your questions cannot be answered

immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response.

You can also:

•

Download user documentation. Go to

visionary-av.com

•

Find answers to resolved problems in the FAQ database. Search by product, category, or phrases. Go to

visionary-av.com

•

Report problems to Visionary Solutions support staff by sending an email to

[email protected]

•

Visit the Customer Support section of the Visionary Solutions web site at

visionary-av.com

ACTORY

EFAULT

ETTINGS

This procedure provides a way to reset the E4200/D4200 units back to the factory default settings, which may be necessary or

desirable in certain circumstances.

The unit will reboot to its factory default settings. Note that a factory default causes all of the settings, including the network

settings, to be reset to factory default values. Performing a factory default reset will restore the

IP.MODE

settings to DHCP, causing

the unit to acquire a new IP address. If there is no DHCP server available on the network, the unit will use Auto IP addressing. See

section

Network Discovery

Method 1:

1. Access the web interface for the unit that will be factory defaulted.

2. Log in with

username

=admin

password

=admin.

3. Click the

System

tab.

4. Click

Factory Default

Summary of Contents for D4200





























































Search results

Summary of Contents for D4200

Reviews:

Related manuals for D4200

Brands by name

Popular brands

Visionary D4200, User Manual

Search results

Summary of Contents for D4200

Reviews:

Related manuals for D4200

Brands by name

Popular brands