47
Control
•
On the
Configuration
page, you can click on the IP Address (hyperlink) of any endpoint to open the embedded web interface
for each unit. On the unit’s web interface, you can rename the units and/or set a user defined location.
Important
: SPECIAL CHARACTERS ARE NOT ALLOWED FOR UNIT ID AND LOCATION. Example:
-@#$%
are
not
allowed.
Note
: When making changesto the endpoints, the endpointsbriefly disappear from the Vision Lite User Interface while they are
rebooting, and the application rediscovers them.
•
From the
Configuration
page, you can update the firmware for any units that may be out of date. The Vision Lite software
displays a message if a newer firmware is available.
•
On the
Routing
tab, you can drag-n-drop to route and switch sources to displays.
Note
: Double-click the preview of a unit to open that unit’s web UI from the
Routing
tab.
