7
Installation and Connections (System Examples)
•
The maximum number of streams possible between switches = link bandwidth (10Gbps) / 800Mbps (for 4K) x number of
encoders (or 200Mbps for 1080p).
•
For 4K streaming, the total number of streams (800xn) must be
≤ 1
0,000.
•
For 1080p streaming, the total number of streams (200xn) must be
≤
10,000.
E4200/D4200
LAN1
& LAN2
E
THERNET
E
XPANSION
P
ORT
E4200/D4200 is equipped with a single main gigabit (
LAN1)
Port for 4K UHD Video, Control, and Powered Device (PD). This single
Ethernet port is used for Video over IP and control, with VLAN tagging capability to separate LAN1 & LAN2 network traffic as needed.
E4200/D4200 is also equipped with an Ethernet Expansion (
LAN2)
Port - Power Sourcing Equipment (PSE). This port enables network
connectivity for control and IP traffic pass-through to remote LAN devices (ex. displays, projectors, control touch-panels). The port
can also be used to daisy-chain multiple endpoints for easy video wall creation or extend distances to displays.
Power connected devices with PoE pass-through
.
E4200 Encoders and D4200 Decoders only require standard PoE power (15w or lower), however, when PoE+ is supplied to the Main
LAN1 port you can pass-through PoE power to devices connected to the
LAN2
Ethernet Expansion Port.
When PoE+ is supplied to the LAN1 port, the UNIT.PSE_ENABLED status found at the bottom of the unit’s web UI Network tab will
display “Available.” When the Status window displays “Available,” use the drop-down menu to choose either TRUE or FALSE. When
set to TRUE, PoE will be supplied out the LAN2 Ethernet Expansion port.
