49
Troubleshooting
5. Click
OK
on the pop-up.
6. The unit will reset to its factory default settings.
Method 2:
1. Locate the reset button on the bottom side of the E4200/D4200.
2. Use a paperclip or similar device to press physical reset button.
3. Press and hold the reset button until the LEDs on the front of the E4200/D4200 indicate the unit has been reset (Fast Link LED).
4. The unit will reset to its factory default settings.
D
IAGNOSTICS
P
AGE
Every encoder and decoder have a diagnostics page that is accessible via the web UI. To access the diagnostics page, either click on
the thumbnail preview on the units Device page of its web interface or type the following address into a web browser:
http://admin:admin@<unit IP address>/diagnostics.html. The diagnostics page provides the following information:
N
ETWORK
I
NFO
Displays the current network link speed for Stream, Uplink, and expansion port. In addition, the network info displays local and
neighbor LLDP information.
