25
Advanced Configuration
A
DVANCED
C
ONFIGURATION
V
IDEO
S
OURCE
T
IMEOUT
(D
ECODER
O
NLY
)
VIDEO.SOURCE_TIMEOUT – When there is no source available, time out TRUE will cause the decoder to switch to the splash screen
after approximately 10 seconds.
V
IDEO
P
OWER
S
AVE
(D
ECODER
O
NLY
)
VIDEO.POWER_SAVE – After the time out, turn off the HDMI output.
HDCP
F
ORCE
O
N
Encoder
: Force the encoder to accept only HDCP sources.
Decoder
: Force the decoder to HDCP encrypt the output.
HDCP Force On determines whether a unit forces HDCP for all sources or sinks (TRUE) or allows non-encrypted to go through natively
(FALSE). When FALSE switching can be slow if you need to renegotiate the HDMI link.
HDCP
F
ORCE
O
FF
(E
NOCDER
O
NLY
)
Tells the source device that the encoder will not accept HDCP encrypted content. It cannot be used to remove HDCP from sources.
I
NPUT
S
OURCE
S
ELECTION AND
P
RIORITY
(E
NCODER
O
NLLY
)
E4200 encoders support multi-input select between AUTO, HDMI1, HDMI2, and USB-C for both the AV stream and HDMI OUT (Loop
Out). The input selection for the AV stream and HDMI OUT are configured separately. This gives the user the ability to select an input
source for the AV stream, then select a different source for the HDMI OUT. Example: HDMI1 selected for AV stream and USB-C selected
for the HDMI OUT.
When the input select is set to AUTO, use STREAM.VIDEO_PRIORITY to set the priority for the AV stream source. Use
VIDEO.HDMI_OUT_PRIORITY to set the priority for the HDMI OUT. Auto select will choose the source based on priority. If the priority
is set to HDMI1 HDMI2 USB-C, the E4200 will select HDMI1 as its source, if there is no source connected to HDMI1 the E4200 will then
automatically switch to the next input in the priority selection. In this example, the E4200 would automatically switch to HDMI2 if
HDMI1 is not connected.
G
ENLOCK
(D
ECODER
O
NLY
)
When set to FALSE allows the decoder output to free run and not be genlocked to the source encoder. Useful for some projectors
that cannot accommodate wide clock range. Should be set to TRUE for video wall setups.
V
IDEO
O
UTPUT
S
ETTING
(D
ECODER
O
NLY
)
Sets the HDMI output operation of a decoder to NORMAL, OFF, LOGO or STANDBY. NORMAL is normal operation transmitting video
out the HDMI output. OFF disables the HDMI output. LOGO displays the splash screen out the HDMI output. STANDBY displays a
black screen out the HDMI output. Each time a decoder gets tuned to an encoder the VIDEO.OUTPUT is automatically set to
NORMAL.
OSD
T
EXT
D
ISPLAY
(D
ECODER
O
NLY
)
The OSD (On Screed Display) is used to put user text onto the screen as an overlay. Once text is entered, the text will appear in the
upper left corner of the display. The default text color is blue. To obtain a key to unlock advanced OSD features (font, font size,
position, and color) contact
