Viscount Legend '70s Artist, User Manual

Page: 33 / 146

EN - 31
Legend ‘70s – User Manual
Modifying a Program
To define the boundaries of a keyboard zone assigned to a module,
move cursor on the line of the desired module through the data entry
dial or the buttons [
<
] and [
>
], then press the dial.
Clearly,
Low Key sets the lower key of the keyboard zone, while Hi
Key sets the highest key. All keys inside the interval will produce
sound according to the selected module.
To select the
Lower Key hold down the [
<
] button and push a key. Hold down [
>
] and press a key to select the
Upper Key .
It is also possible to use the data entry dial to select a note, and the [
<
] and [
>
] buttons to move the cursor.
One you have finished setting the parameters, press [EXIT] to return to the previous page.
Split mode enabled (SPLIT MODE = ON)
When the Split mode is enabled, the keyboard is split in two parts: the
Lower and Upper parts, and each module can be assigned to one of
these parts. The Split point is the key that sets the boundary between
the two parts, as described in the
COMMON section (page 29).
The video page is similar to the one that appears when the Split mode
is disabled; however, now the keyboard only has two parts.
Each module can be assigned to either the Upper or Lower part.
The Upper section begins on the key to the right of the Split point,
while the Lower section includes the key that serves as Split Point.
To assign a module to one of the parts, use the data entry dial or the
[
<
] and [
>
] buttons to place the cursor on the line of the desired
module, then press the dial.
The
Split Part parameter indicates the keyboard part assigned to the
selected module. To change a value, use the data entry dial. One you
have finished setting the parameters, press [EXIT] to return to the
previous page.
E.PIANO
A.PIANO
CLAVI
SOUND COLL.
EXTERNAL
Hi Key Low Key Low Key Hi Key Hi Key
Upper Part Lower Part
Split Point
E.PIANO
A.PIANO
CLAVI
SOUND COLL.
EXTERNAL
NB
- Hold down the [SPLIT] button and press a key to set the Split point directly on the keyboard.
- Hold down [the SPLIT] button and press [ON/OFF] once or twice to assign it to the Upper and Lower parts (press
again to cycle between Upper and Lower).