EN - 35
Legend ‘70s
– User Manual
Modifying a Program
through the
Master
Clock parameter on the
COMMON
).
Values:
1/1, 1/2D, 1/1T, 1/2, 1/4D, 1/2T, 1/4, 1/8D, 1/4T, 1/8, 1/16D, 1/8T, 1/16, 1/16T, 1/32,
1/64
NB
D : dot
T: triplets
Feedback
Quantity and phase of the signal that is sent back to the effect's input, determining how much the
signal is enriched and modified. Negative values correspond to an inverted phase signal.
Values:
between -5.0 and +5.0
Pre Delay
Modulation offset.
Values:
between 0.0 and 50.0 msec
L/R Phase
Phase between the right and left channel of the modulating signal.
Values:
between 0 and 180 deg (degrees). the value 0 deg corresponds to a monophonic signal.
As the value increases, the signal becomes more and more stereophonic.
Sync
Synchronisation between the modulating signal and metronome tempo, as set through the
Master
Clock
parameter of the
COMMON
section (page
Values:
OFF, ON
EQ Low Gain
Set the gain (positive value) or attenuation (negative values) of the low frequencies generated by
the effect.
Values:
between -12.0 and +12.0 dB
EQ High Gain
Set the gain (positive value) or attenuation (negative values) of the high frequencies generated by
the effect.
Values:
between -12.0 and +12.0 dB
Dry/Wet
[AMOUNT]
Balance between the effect's original input signal (
Dry/Wet
=0.0) and the effected signal
(
Dry/Wet
=10.0).
Values:
between 0.0 and 10.0
Phaser
This effect modulates the phase of the signal and sums it to the original signal.
Parameter name
Description
Switch
[FX ON]
Activate / deactivate effect.
Values:
OFF, ON
FX Config
FX Out Routing
Reverb Send
Same function of the parameters described at page
Phaser Type
Phaser type.
Values:
4-Stage, 6-Stage, 8-Stage, 12-Stage
LFO Depth
Modulation depth.
Values:
between 0.0 and 10.0
LFO Speed
[RATE], [TAP]
If the Syncparameter = OFF
Modulation frequency.
Values:
between 0.0 and 10.0
If the Syncparameter = ON
Time signature used to calculate the modulation frequency, based on metronome tempo set
through the
Master
Clock parameter on the
COMMON
).
Values:
1/1, 1/2D, 1/1T, 1/2, 1/4D, 1/2T, 1/4, 1/8D, 1/4T, 1/8, 1/16D, 1/8T, 1/16, 1/16T, 1/32,
1/64
NB
D : dot
T: triplets
Feedback
[AMOUNT]
Quantity and phase of the signal that is sent back to the effect's input, determining how much the
signal is enriched and modified.
Values:
between 0.0 and 10.0
Manual
Central frequency of the signal modulation.
Values:
between 0.0 and 10.0
L/R Phase
Phase between the right and left channel of the modulating signal.
Values:
between 0 and 180 deg (degrees). the value 0 deg corresponds to a monophonic signal.
As the value increases, the signal becomes more and more stereophonic.
Sync
Synchronisation between the modulating signal and metronome tempo, as set through the
Master
Clock
parameter of the
COMMON
section
(page
Values:
OFF, ON
Summary of Contents for Legend '70s Artist
