Viscount Legend '70s Artist, User Manual

Page: 34 / 146

EN - 32
Legend ‘70s – User Manual
Modifying a Program
EFFECTS section
The
EFFECTS menu includes the parameters of the EFFECTS section
on the main
panel
(see page 9 ).
The EFFECTS section allows to use two independent effects, that can
be recalled through the buttons [1] and [2] on the main
panel
. Doing so
will update the parameter value shown on the display. The effect
selected for editing appears on the display on the heading of the menu
by the field FX1 or FX2.
To access this menu, enter the
EDIT PROGRAM screen (page 28 )
place the cursor on the EFFECTS field and press the data entry dial or
hold down the effect category selection knob for a short while (see point 6, page 9 ).
Effect types
The available effects on
Legend ’70s
belong to eight categories. To choose a category, use the dedicated knob
(read point 6, page 9 ) or the Category parameter under the EFFECTS menu.
Each effect category disposes of an adequate number of presets, that allow the user to recall programmed
configurations, each carefully calibrated to faithfully represent the features of the specific effect. The main
parameters of each effect can be adjusted by using the [AMOUNT] and [RATE] knobs, and the [TAP] button on
the main panel. The more demanding musician can use the
Custom preset to modify all available parameters,
to further customise the effect.
To select an effect configuration, press the effect type knob or use the
Preset parameter.
Tremolo and Vibrato
The Tremolo modulates the signal amplitude, i.e. its volume, in a cycle, in order to obtain a trembling effect.
The Vibrato modulates the signal frequency, i.e. its pitch, in a cycle.
Parameter name Description
Switch
[FX ON]
Activate / deactivate effect.
Values: OFF, ON
FX Config Connect the effects FX1 and FX2 of the EFFECTS section.
Values:

Parallel: parallel link. The FX1 output signal is summed to the FX2 output signal.

Serial: serial link. The FX1 output signal is sent to the FX2 input.
PARALLEL
SERIAL
Module
FX2
FX OFF
FX ON
FX OFF
FX ON
FX1
Reverb
Master
EQ
MAIN
L-R
Module FX1 FX2 Reverb
Master
EQ
MAIN
L-R
FX ON FX ON
FX OFF FX OFF
NB
- The following tables show all the parameters that the user can modify through the Custom preset. Under the
parameter name, the screen shows the knob and [TAP] button that allow to control said parameter.
- For a complete list of available presets read table List of effect presets, page 64 .
- For the Others category, after pressing the category selection knob to select a preset, use the [<] and [>] buttons
to switch to PEQ3, PEQ5, GEQ5, Comp or Rotary.