EN - 44
Legend ‘70s
– User Manual
Modifying a Program
Trem Sync
Enable / disable the synchronisation of the Tremolo effect of the E.PIANO module with the
Master
Clock
parameter. When the
Tremolo Sync
parameter is enabled (
Tremolo Sync
: ON), the Tremolo
modulation frequency is determined by the
Master Clock
and the
Tremolo Speed
parameter
determines the multiplier factor of the
Master Tempo
parameter (
COMMON
section) or of the
Values:
OFF, ON
Trem Stereo
Enable / disable the Stereo mode of the Tremolo effect of the E.PIANO module. When this
parameter is disabled (
Tremolo Stereo
: OFF), the Tremolo output signal is centered in the stereo
image. When the parameter is enabled (
Tremolo Stereo
: ON), the output signal moves left and
right on the stereo image.
Values:
OFF, ON
Amp Switch
[AMP ON]
Enable / disable the Amplifier effect on the E.PIANO module.
Values:
OFF, ON
Amp Model
Amplifier effect model on the E.PIANO module. There are 13 amplifier models, differing in pre-
amplifier, power amplifier, cabinet and speakers.
Values:
Suit76, Wr200, Sweet, Vintage, ’59 Clean, Twin, Small, Twin Punch, Lo-Fi, Punch Stack,
Fuzz Drive, Bass Stack, Sub Bass
Amp Drive
Saturation (distortion) of the output Amplifier signal of the E.PIANO module.
Values:
between 0.0 and 10.0
Bass Gain
Set the gain (positive value) or attenuation (negative values) of the low frequencies generated by
the E.PIANO module.
Values:
between -5.0 and +5.0
Treble Gain
Set the gain (positive value) or attenuation (negative values) of the high frequencies generated by
the E.PIANO module.
Values:
between -5.0 and +5.0
A.PIANO section
The
A.PIANO
menu includes all the configuration parameters of the
A.PIANO module (described at page
). To access this menu, enter
the
EDIT PROGRAM
screen (page
) place the cursor on the
A.PIANO
field and press the data entry dial, or hold down the sound
selection knob of the module for a while (point 4, page
).
Parameter name
Description
Timbre
[timbre selector]
Name of the selected timbre. There are 8 acoustic piano timbres, differing in their acoustic and
mechanical characteristics. Use the
Legend ‘70s Editor
application to modify the selected timbre.
Changes made through this application affect all Programs.
Values:
Piano 1, Piano 2, Piano 3, Piano 4, Piano 5, Piano 6, Piano 7, Piano 8
Switch
Volume
Output Routing
Reverb Send
Note Shift
Detune
Velocity Sens
Pitch Bend
Mod.Wheel
Sustain Pedal
Foot Switch1
Foot Switch2
Foot Control1
Foot Control2
Same function of the parameters described at page
Dynamic
[DYNAMIC]
Dynamic range of the acoustic piano. Reduce (negative values) or increase (positive values) the
level difference between pianissimo and fortissimo.
Values:
between -5.0 and +5.0
Brilliance
[BRILLIANCE]
Sound brilliance. When the value is 0 the sound is perfectly balanced. Negative values enhance
the bass frequencies and dampen the trebles: the result is a less brilliant sound. Positive values
enhance the treble frequencies and dampen the bass: the result is a more brilliant sound
Values:
between -5.0 and +5.0
NB
The following table includes all the available parameters of the A.PIANO module. The knob or button that allows direct
control of the parameter through the panel, is written under the parameter name.
Summary of Contents for Legend '70s Artist
