VIRATA ADSL Ethernet Router Series, Technical Manual

Page: 51 / 84

○ ○ ○ ○ ○
A- Commonly Used Commands
A-5
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
A.1.5 ipatm pvc
Syntax:
ipatm pvc
ipatm pvc add <i/f> [<port>] <vci>/[<IP address>][/<pcr>]
ipatm pvc delete <vci> [<port>]
ipatm pvc flush
Description:
Lists configured PVCs for use by IP-over-ATM; configures another; deletes one; or
deletes all.
<i/f>
is the name of an interface configured for IP-over-ATM using PVCs.
<vci>
is the VCI to use for the PVC. The range of possible VCIs depends on the
system.
<IP address>
is the IP address of the machine at the other end of the PVC.
If it is not specified, TCP/IP will use Inverse ATMARP [RFC 2225 (RFC 1577)] to
determine the IP address; if it is specified, then Inverse ATMARP will not be used.
<pcr>
is the peak cell rate, in cells per second. The default is 60000. (If neither
IP address nor PCR is specified, the “/” after the VCI can be omitted.)
<port>
is the port name: it must be specified if the machine is a switch, and not
otherwise.
Configuration saving saves this information.
Example:
ip ipatm pvc add wan atm
0/35
remoteip 202.166.29.2