ix
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
About This Manual
This manual is written for users who are familiar with console commands. It
contains instructions on how to configure your router for different network configurations.
Chapter 1 - Setting Up Local Management
guides you on how to setup and establish
a communication link between your router and PC. With this local mangement
established, you can then start issuing console commands.
Chapter 2 - Basic Commands on Running Local Management
gives the basic
commands to run the local management.
Chapter 3 - Configuring Your Router
guides you on how to configure your router for
different network configurations. A Configuration Flow Chart is provided. The line
protocols discussed are
RFC 2684 (RFC 1483) Ethernet Framing
,
RFC 2684 (RFC
1483) IP Framing
,
RFC 2225 (RFC 1577) IP over ATM
,
RFC 2364 PPPoA
and
RFC
2516 PPPoE
. The configuring of
NAT Inbound Port Forwarding
,
DHCP Server
,
DNS
Relay
and so on, can also be found in this chapter.
Chapter 4 - Configuring Your Transparent Bridge
guides you on how to configure
your router for transparent bridge.
Chapter 5 - Router Configuration Examples
give you router configuration examples
based on
RFC 2684 (RFC 1483) IP Framing
and
RFC 2364 PPPoA
.
Chapter 6 - Configuring PPTP (Point-to-Point Tunnelling Protocol)
guides you on the
console commands and setting up of the dial-up networking for PPTP.
You will be able to find detailed descriptions of the console commands at
Appendix
A - Commonly Used Commands
and the commonly used TCP/UDP Ports at
Appendix
B - Well-Known TCP/UDP Ports
.
