VIRATA ADSL Ethernet Router Series, Technical Manual

Page: 74 / 84

○ ○ ○ ○ ○
A- Commonly Used Commands
A-28
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
A.5.3 dnsrelay retry
Syntax:
dnsrelay retry <retry value>
Description:
This command sets the maximum number of retries the DNS relay is allowed to
perform in the event of connection or transmission failure. The retry value must be
a number between 1 and 10 .
Example:
>
dnsrelay retry 4
Connection retry value set to 4.
>
A.5.4 dnsrelay server
Syntax:
dnsrelay server <DNS server IP address>
Description:
This command tells the DNS relay which DNS server to contact. Caution must be
exercised when using this command - if the DNS relay already knows which DNS
server to contact then all existing connections will be reset, all outstanding traffic
dropped, and the relay will then attempt to communicate with the newly appointed
DNS server.
Example:
>
dnsrelay server 192.168.219.50
DNS server address set to 192.168.219.50.
>