VIRATA ADSL Ethernet Router Series, Technical Manual

Page: 31 / 84

○ ○ ○ ○ ○
3 — Configuring Your Router
3-15
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3.5 Configuring DHCP Server
The following DHCP configuration information may be used with any one of the line
protocols illustrated in Section 3.3.3, Step 3 - Configuring the WAN to produce a
complete system.
DHCP is not applicable to Transparent Bridge configuration.
3.5.1 Some useful commands for DHCP
i) To list down the configuration file:
dhcpserver config
ii) To delete the last command line:
dhcpserver config delete
iii) To remove all previous configuration lines:
dhcpserver config flush
iv) To show dhcpserver status:
dhcpserver status
v) To allow changes to take effect immediately:
dhcpserver config confirm
dhcpserver reset
vi) To save changes permanently:
config save
Any changes to the dhcpserver configurations must be followed by
dhcpserver config confirm, dhcpserver reset
and
config save
.